Multi-voltage
The power supply will never be an issue, even in unstable conditions (such as motor generators).
The machine can be connected to any three-phase power supply, as it automatically adapts to the voltage available on site in order to ensure perfect performance at all times. The range of three-phase power supplies starts from 230V (±15%), to 400V (±15%), up to 440V (±15%).
PFC
The Power Pulse Digital greatly reduces the total cost of the required power consumption by means of the PFC (Power Factor Corrector). What are the savings? A 30% saving in power consumption when compared to a traditional inverter and a 45% saving when compared to an electromechanical welding machine.
User Interface Quick Setting
Very intuitive and user-friendly interface, even for the less experienced welders.
The large 5” high-resolution display allows the parameters to be easily read even in poor lighting conditions. In addition, 7 segments have been added to the display, in order to allow welders to view the main parameters even when they wear a welding mask. The Quick Setting system makes it easier to correctly set up the welding parameters, greatly reducing the machine set-up times.
User Interface
A simple and user-friendly interface ensures quick access to all parameters. The large, very bright 5” display ensures a clear and easy to understand view by using the touch screen mode or the dedicated mechanical key.
Wire Cutter
The neat wire cut at the end of the welding operation prevents a weld pool from forming, ensuring an optimal next strike.
Stable Arc
The very fast control provided by Weco Digital Control technology allows metal melting to be immediately balanced. This almost entirely removes any splashes in the initial welding stage and the weld bead is even from beginning to end.
Arc Strike
The new starting system controlled by Weco Digital Control technology ensures optimal strikes to be achieved at all times, avoiding initial blows and minimizing the likelihood of spatters. All this in any operating conditions.
High Control (dHC)
The new Pulsed HC (High Control) boasts a very quick arc control in order to optimize drop detachment with greatly reduced power.
Power Focus
The special Power Focus function has been designed to reduce total welding costs, reducing the total number of joints to be welded.
Power Root
The special Power Root function is a short arc transfer, controlled with a cold drop which ensures a very high quality during the root passes.
K Deep
The function K-deep, was conceived in order to keep even the penetration during welding, independently from stick out variations.
IN THE BOX?
1 | 01405301 | BINZEL 36 EVO 4M MIG GUN |
1 | 002.0001.0286 | 10 METRE INTERCONNECTION CABLE SET - SHEATHED |
6 | LAV90HT-70 | 70MMSQ EARTH CABLE |
1 | EC500 | 500AMP EARTH CLAMP |
1 | CT70-12 | CRIMP LUG |
1 | MPCX24 | LARGE DINSE CONNECTOR |
1 | REG | ARGON TWIN GAUGE REGULATOR |
1 | P4P32ASP | 32A 3PHASE 4PIN PLUG TOP |