is a professional 3 Phase Inverter Power Source with a separated wire feeder WF 104.
A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires.
Pulse HS allows to:
1 – Increase considerably execution speed
2 – Increase deposition rate (Kg/h)
3 – Deeper penetration, lower risk of lack of fusion and deformations.
4 – Reduce heat input
Power Root allows to:
1 – Deeper penetration, lower risk of lack of fusion and deformations.
2 – Increase considerably execution speed
3 – More arc stability even with longer stick-out
4 – Low costs of mechanical preparation of caulkers
Power Focus allows to:
• Optimized root pass welding
• Vertical down in sound weld quality
• Better model ability
• “cold“ droplet transfer
• Thin sheet welding
Pioneer Pulse 321MSR can be easily moved on difficult working areas thanks to robust and big wheels.
– Optional cooling unit available
– Fan on request and Built-in Air Tunnel protects electronic devices from dust and saltiness and improves reliability
– 3T Special allows both Hot Start and Crater Filler current setting, for optimal penetration at start and crater filling at bead’s end.
– Memory locations for welding process repeatability
– Optional push-pull torch applicable for MIG aluminium welding
– Optional remote controlled by MIG-torch DIGIMANAGER 240 and RC unit
– 1 x 10 Metre interconnection cable set- sheathed
– Phases Control Device to supervise the right connection to the electrical NET
IN THE BOX?
1 |
SB364M |
BINZEL STYLE 36 4M, MIG GUN |
6 |
LAV90HT-50 |
50MMSQ EARTH CABLE |
1 |
EC500 |
500AMP EARTH CLAMP |
1 |
CT50-12 |
CRIMP LUG |
1 |
MPCX24 |
LARGE DINSE CONNECTOR |
1 |
REG |
ARGON TWIN GAUGE REGULATOR |
1 |
P4P20ASP |
20AMP 3PHASE PLUG TOP |
SPECIFICATIONS